Model FF4600-PLS-SC
|
Self-Cleaning Drawer Module
Model DR600-SC
|
Selection Guide for Standard and Self-Cleaning FF Series
Click on model number to purchase online
| |
FF4400PL/PLS |
FF4600PL/PLS |
FF4800PL/PLS |
FF4100PL/PLS* |
| A |
10 1/2 |
10 5/8 |
10 7/8 |
Varies |
| B |
4x4 |
6x6 |
8x8 |
10x10 |
| C |
6 1/2 |
8 1/2 |
10 1/2 |
12 1/2 |
| D |
2 5/8 |
4 3/8 |
6 3/8 |
Varies |
| E |
2 5/8 |
2 3/4 |
3 |
Varies |
| F |
7/8 |
1 3/4 |
3 1/8 |
Varies |
| G |
2 1/8 |
3 7/8 |
6 |
Varies |
| H |
1 1/2 |
2 3/4 |
4 1/4 |
Varies |
| I |
1 11/32 |
1 5/16 |
1 11/32 |
Varies |
| J |
3/8 |
7/16 |
3/4 |
Varies |
| K |
3 |
5 |
6 3/4 |
8 3/4 |
| L1 L2 L3 |
Per Customer Specifications |
| M |
6 3/8 |
6 1/2 |
6 3/4 |
Varies |
 The Bunting® FF Series Drawer Filter product line has earned the CE mark for the European Economic Area (EEA). The CE marking certifies that a product has met EU health, safety, and environmental requirements, which ensures consumer safety.
Self-Cleaning Drawer Magnets Reduce Downtime and Increase Safety
Our exclusive dual-action Self-Cleaning Drawer Magnet lets you save
time two ways as you protect product purity and equipment.
You can clean it in place with one quick pull or remove the whole
drawer assembly for safe off-the-machine maintenance.
Each self-cleaning unit has extra-long magnetic cartridges that fit inside stainless
steel sleeves that are attached to the see-through polycarbonate
drawer front. Tramp metal collects on the sleeve surfaces
and falls from the sleeves as they are pulled clear of the
magnetic cartridges and the drawer housing. No wiping or brushing
required. The whole magnetic cartridge and drawer assembly
can also be completely removed from the housing. The operator
can then carry the unit to a designated trash dump area for
cleaning without getting tramp metal anywhere near the molding
equipment. Either way, tramp metal removal is fast, safe, and easy.
|
You'll especially like our self-cleaning option if your drawer
magnet is equipped with Rare Earth Magnetic Cartridges.
These high-energy magnetic cartridges can be difficult
to clean thoroughly by hand because of their high magnetic strength.
|
|
Model FF4600-PLS
|
|
Optional Right- or Left-Hand Mounted Purge Hopper (Right-Hand shown)
slide gate
|
|
|
|
Optional Dump Tube
(may be located on any side)
Optional Dump Tube
(may be located on any side)
|
|
Optional Powder Seal for Slide Gate
|
 |
Drawer Magnet Options
Patented No-Spill
TM
Slide Gate
The patented No-Spill Slide Gate completely and positively
shuts off product flow, so you don't have to worry about product
spillage creating a mess or safety hazard when you remove
the drawer for cleaning.
Purge Hopper
Our Purge Hopper speeds clean-out of your equipment when changing
color or compound - without sacrificing magnetic protection
or taking the time to empty your hopper.
Dump Tube
This option lets you empty the drawer housing and material
hopper of plastic after a run has been completed.
Liquid Port
The Liquid Port allows you to inject liquid color additive
into the resin. The port can also be used to hold a temperature
probe.
Powder Seal Kit
This option prevents powder materials from leaking out around
the Slide Gate - which is especially important in applications
involving PVC or similar powder materials. The kit provides
a compression seal around the Slide Gate. Order as original
equipment or retrofit on site.
|
Convert Your Standard Bunting® FF Series Drawer Magnet with Self-Cleaning Drawer Modules
Now you can upgrade Bunting® Standard Drawer Magnets
by replacing the drawer module. Self-Cleaning Drawer
Modules are available to retrofit all new FF Series
Models 4400, 4600, 4800, and 4100 (with or without Slide
Gate option) manufactured after August 1, 1989. Just
specify your Drawer Magnet model number when ordering.
Dimensions for Self-Cleaning Modules, other than those
shown at right, are identical to Standard FF Series
measurements.
|
Ordering Information
Bunting® part numbers denote models and features. Drawer
Magnet Part Numbers have three parts. The initial two
letters designate the model type. The numerical digits
indicate the size of the square top plate. The trailing
letters specify Drawer Magnet options. For
example: Part FFS4600-PLS-CR
This part number describes an FF Series Drawer
Magnet with a 6" Square Stainless Steel Housing
equipped with a Slide Gate and Ceramic Magnet-Powered
Cartridges.
|
FF Series Part Number Explanation
Model/Type
FF = Mild Steel Housing
FFS = Stainless Steel Housing |
Size
4400 = 4" Square
4600 = 6" Square
4800 = 8" Square
4100 = 10" Square |
Options
PL = Without Slide Gate
PLS = With Slide Gate
|
Magnetic Material
CR = Ceramic
AL = Alnico
NPB = Neodymium Power-Based Rare Earth
material
NHI = Neodymium High-Intensity Rare Earth
material for the most demanding applications
|
Low-Profile Part Number Explanation
Model/Type
LP = Mild Steel Housing
LPS = Stainless Steel Housing
|
Size
1600 = 6" Square
1800 = 8" Square
|
|
Options
PL = Without Slide Gate
PLS = With Slide Gate
|
Magnetic Material
CR = Ceramic
AL = Alnico
NPB = Neodymium Power-Based Rare Earth
material
NHI = Neodymium High-Intensity Rare Earth
material for the
most demanding applications. |
| Please specify purge
hopper, dump tube, and liquid dispensing
port options and locations when ordering.
|
|
|
For Drawer Magnet dimensions click on:
|
