| Contact Us |
Bunting® Magnetics Co.
500 S. Spencer Ave.
P.O. Box 468
Newton, Kansas 67114-0468
U.S.A.
Fax (316) 283-4975
bmc@buntingmagnetics.com
Call us at (800) 835-2526 |
|
Magnetic Liquid Traps for Continuous, Dependable Permanent
Magnetic Protection against Tramp Iron Contamination
Bunting® Magnetic Liquid Traps are designed to remove ferrous
tramp from liquid processing and conveying lines. They provide
dependable protection against tramp iron contamination and
come equipped with powerful, high-energy Neodymium magnets
to capture even weakly magnetic debris like work-hardened
300 series stainless steel fragments.
Magnetic Inline Liquid Trap
 Bunting® Magnetics Inline Liquid Trap uses Powerful Rare Earth Magnets to remove even the smallest ferrous particles from liquids with a higher viscosity. The straightthrough design allows liquids with a higher viscosity to travel easily through the trap.
- The straight-through design allows for liquids with a higher viscosity.
- Equipped with powerful Neodymium High Intensity Rare Earth Magnets.
- High Temperature Rare Earth Magnets for temperatures up to 300°F.
- Cartridge-Style magnets are removed individually and easy to clean reducing labor costs and downtime.
- Easy spot check the magnetic cartridge for contamination with unique Clean In Place (CIP) design.
- Easy to install where space is a problem.
- Available in 3” & 4” Units.
Cartridge-Style
Liquid Traps
Cartridge-Style Liquid Traps are ideal for use with
non-fibrous fluids - where there are no solids larger
than 0.5'' diameter and no risk of clogging. Trap design
forces liquids through a tightly spaced grid of magnetic
cartridges to ensure close contact between the product
and the magnetic field. Ferrous tramp is magnetically
extracted from the liquid flow by powerful Rare Earth
magnets and held on the cartridge surfaces.
For cleaning, you simply remove
the cartridge-lid assembly from the trap housing and
wipe off the collected metal particles. The T-shaped
body of the trap provides a sump in which heavy non-ferrous
contaminants such as small stones and 300-series stainless
steel fragments can collect.
|
Self-Cleaning Cartridge-Style Magnetic Liquid Traps
Self-Cleaning Cartridge-Style Traps offer the added
benefit of fast, easy cleaning. Wherever large amounts
of tramp are anticipated or when shutdown time must
be kept to a minimum, the MLT-CSC is recommended. It
can be cleaned and returned to service quickly.
To clean the trap, you remove the
cartridge assembly from the housing and then simply unlatch and
slide the magnetic cartridges out of the stainless steel
cleaning tubes that surround them.
The tramp metal falls away. Because of the air gap created
by the cleaning tubes, the MLT-CSC has lower surface
holding force than the MLT-C.
|
Single Plate Magnet Style Magnetic Liquid Traps
Single Plate Magnet Style Liquid Traps effectively remove
ferrous particles from viscous and fibrous liquids and
liquids containing large suspended solids. The MLT-SP
is designed to ''throw'' contaminants against a magnetic
plate and into a deep magnetic field where they are
captured and held. This unit's 3-pole magnetic field
creates intense holding forces at either side of the
deflector, where ferrous contaminants can be trapped
and protected from the wiping action of the liquid flow.
The deflector creates a 180-degree change in the direction
of flow to agitate the product and expose contaminants
that would otherwise be blocked by suspended solids.
A 7/8'' gap between the deflector and the magnet face
allows non-ferrous solids to pass unobstructed.
Cleaning requires removing the plate magnet from the housing
and wiping the ferrous tramp to the edge of the plate,
where it can easily be brushed away. Single Plate Traps
do not have sufficient flow area for a 4'' line. When
this size is required, select a Dual Plate Trap.
|
Dual Plate Magnet Style Magnetic Liquid Traps
Dual Plate Magnet Style Traps offer the dual advantages
of high flow capacities and gentle flow characteristics.
The MLT-DP's gently sloped diverter creates a smooth
flow pattern that protects fragile products from damage.
At the same time, by dividing the product flow over
two plate magnets, Dual Plate Traps can effectively
handle double the flow rate of a Single Plate model.
Alternatively, the MLT-DP allows you to increase magnetic
protection by
slowing the flow rate and doubling the time contaminants are
exposed to the magnetic field.
|
|
|
|
|
|
|
|
